skip to main text

Changing the Clear Coating Settings

When you perform clear coating, the printer applies chroma optimizer (CO) ink onto the printing surface and allows you to adjust the glossiness.

This section explains procedures for changing the clear coating settings.

  1. From the Print Dialog, display the pop-up menu, and select Advanced Paper Settings

  2. Setting the clear coating area

    Select Auto or Overall under Clear Coating Area.

    figure:Clear Coating Area of Clear Coating in the Print dialog
    Auto
    The printer automatically sets the areas to be clear-coated and whether clear coating is to be performed.
    It may be possible to reduce the ink consumption of the chroma optimizer (CO) or to accelerate the print speed.
    Overall
    The printer clear-coats the entire print area.
    If selecting Auto produced unsatisfactory clear coating effects, selecting Overall may improve the results.

    Important

    • On the Quality & Media, look at Media Type. If a media type other than Photo Paper Plus Glossy II A, Photo Paper Pro Platinum, Photo Paper Pro Luster, Photo Paper Plus Semi-gloss, Photo Paper Pro Crystal Grade, Lightweight Photo Paper, Heavyweight Photo Paper, or Baryta Photo Paper is selected, you cannot select Overall.
    • If Overall is selected and the media type is changed to one that cannot use Overall, the clear coating area setting is changed to Auto.
  3. Click Print

    When printing is performed, the clear coating effect that was set is added when the document is printed.